美國伯樂DCode突變檢測系統貨號1709081

系統功能靈活，適合多種突變檢測方法
 
在癌癥研究發展及多種單基因或多基因疾病的研究過程中，探索未知突變起著非常重要的作用。DNA 多態性 是物種的生態與進化研究非常有用的工具。應用范圍包括物種鑒定、種群結構分析及遺傳多樣性研究等。
DCode 系統由帶溫度控制模塊（包括微處理器控制加熱）的電泳設備、一個緩沖液再循環泵、一個攪拌器及鋪制特殊應用凝膠的附件組成。冷卻槽及一個外部實驗室冷卻器可把運行溫度控制在室溫下。一塊凝膠能在2 個小 時內運行64 個樣品，并提供5-70°C 范圍內的精確溫度控制。它可與下列的電泳技術配合使用來檢測單堿基變化：
單鏈構象多態性（SSCP）
變性梯度凝膠電泳（DGGE）
時間溫度梯度電泳（TTGE）
均一變性凝膠電泳（CDGE）
為了獲得zui高的通量和效率，許多實驗室采用多種技術。在快節奏研究環境中，不同方法間的快速切換和轉換 到新技術的能力是非常關鍵的。DCode 系統能迎合所有主要突變檢測技術的需要。其靈活的功能與優點包括：
溫度控制選擇
模塊式設計，可滿足用戶現在與將來的需要
的組合配件，簡化啟動過程
針對特定技術的試劑和對照物，適合DGGE、CDGE、SSCP 和TTGE 等技術目錄 #
描述
DCode Systems
170-9080
DCode System for DGGE, 120 V, for 16 cm gels with single prep well (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9081
DCode System for DGGE, 220/240 V, for 16 cm gels with single prep well (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9082
DCode System for DGGE, 100 V, for 16 cm gels with single prep well (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9083
DCode System for DGGE, 120 V, for 10 cm gels with 2 prep wells (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9084
DCode System for DGGE, 220/240 V, for 10 cm gels with 2 prep wells (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9085
DCode System for DGGE, 100 V, for 10 cm gels with 2 prep wells (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9086
DCode System for CDGE, 120 V, for 16 cm gels with 20 wells (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels
170-9089
DCode System for TTGE, 120 V, for 16 cm gels with 20 wells (1 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels, control reagents for TTGE
170-9090
DCode System for TTGE, 220/240 V
170-9091
DCode System for TTGE, 100 V
170-9092
DCode System for SSCP, 120 V, for 20 cm gels with 20 wells (0.75 mm), includes comb gasket, 2 sets of clamps, Model 475 gradient former, all parts required to cast gradient gels, cooling tank adaptor for use with external cooling bath, control reagents for SSCP
170-9093
DCode System for SSCP, 220/240 V
170-9094
DCode System for SSCP, 100 V
170-9102
Complete DCode System, 120 V, Mac, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP systems
170-9103
Complete DCode System, 220/240 V, Mac, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP, plates, combs and spacers to cast 1 mm and 0.75 mm thick 10, 16, and 20 cm gels as described for the DGGE, CDGE, TTGE, and SSCP systems
170-9104
Complete DCode System, 100 V, Mac, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP systems
170-9105
Complete DCode System, 120 V, PC, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP, plates, combs and spacers to cast 1 mm and 0.75 mm thick 10, 16 and 20 cm gels as described for the DGGE, CDGE, TTGE, and SSCP systems
170-9106
Complete DCode System, 220/240 V, PC, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP, plates, combs and spacers to cast 1 mm and 0.75 mm thick 10, 16, and 20 cm gels as described for the DGGE, CDGE, TTGE, and SSCP systems
170-9107
Complete DCode System, 100 V, PC, includes electrophoresis/temperature control module with standard and cooling tanks, sandwich core, Model 475 gradient former with all accessories required to cast gradient gels, WinMelt software, control reagents for DGGE, CDGE, TTGE and SSCP, plates, combs and spacers to cast 1 mm and 0.75 mm thick 10, 16, and 20 cm gels as described for the DGGE, CDGE, TTGE, and SSCP systems